Dishwasher Repair Service

Professional Dishwasher Repair Service in Irvine

Washing dishes becomes easy and pleasant when using a dishwasher to perform this task. That’s why you consider your dishwasher an important and useful appliance in your household. So, when your dishwasher breaks down, you need to have it repaired as soon as possible. Moreover, to prevent your dishwasher from frequent problems and prolong its life, you need to provide it with thorough maintenance. In both cases, you need to find a reliable and vetted company to accomplish these procedures. By contacting Good Repairman, you can rest assured you are making the right choice. Our skilled and licensed technicians can handle any task.

There is water near or under the dishwasher
Make sure the door is closed as tight as it should be, and close it again if necessary.

Check if the appliance is level and keeps all four feet on the floor. Adjust the feet if necessary.

Confirm you do not have too much rinse agent dispensed. Set the rinse agent dispenser to a lower amount.

Check if the cause comes from using too much soap. To solve this, it is recommended you run your appliance without any detergent.

Your dishwasher fails to start
Make sure the door is closed as tight as it should be, and close it again if necessary.

If your dishwasher has a top-button control option, ensure you close the door no more than three seconds after you press the start button.

Check if it’s supplied with power and reset the breaker if necessary.

Inspect your display. If you notice such options as Delay Start or Control Lock, disable them as they will prevent your dishwasher from starting.

Check if the water supply valve is off, and if so, turn it on.

Inspect the dishwasher tub to remove any debris. Presence of debris can prevent the float assembly from moving.

 

The door is always opening
If your appliance is new, you may need to push harder when closing the door because the door gasket is hard at first.

Confirm none of the dishes, pots, utensils, etc., stick out of the dishwasher. Adjust them if necessary.

Check if there is any food or other object on the door gasket and clean it if necessary.

Confirm all plastic spacers don’t face toward the back of the dishwasher.

Check if the appliance is level and keeps all its feet on the floor. Adjust the feet if necessary.

Your dishwasher won’t drain
Inspect the drain hose running from your dishwasher to the main drain line or the garbage disposal to find out where it curves too much and adjust it if necessary. If a garbage disposal has been recently installed, disassemble the joint to ensure you have already removed the “knock out plug”. Confirm the drain hose is not clogged or blocked and remove items if necessary. There is an air gap in some dishwasher models. If you have such a model, check if it is clogged with any soil. In order to clean it, raise the cover, undo the cap, and remove the soil using a clip.

Dishes are dirty after washing
Check the dispenser and fill it with rinse aid.

Check the detergent dispenser to confirm it is clean enough and clean it if necessary.

Inspect the dishwasher tub for any debris. Remove it as this can prevent the float assembly from moving.

Check if you are using too much soap, as you can have the dishes covered with soap residue at the end of the cycle. To fix this issue, it is recommended you run your appliance without any detergent.

 
The appliance fails to fill with cold water
Make sure the door is closed as tight as it should be, and close it again if necessary. Check if the water supply valve is off, and if so, turn it on. Check the dishwasher tub for any debris. Remove any you find as this can prevent the float assembly from moving. Confirm Demo Mode is deactivated and disable it if it’s not.  

Still having problems? Book a dishwasher repair online

Dishwasher issues we can address

If you face one of problems listed below, call us for assistance to fix it promptly:

  • Glassware is not as crystal clear as it is supposed to be.

The cause of this problem varies. It can happen because you did not rinse the glassware sufficiently before you loaded it into your dishwasher, or you forgot to do it at all. On the other hand, cloudiness can be the result of using hard water. In this case the solution is to use a softener in order to make the water less hard. Our techs will determine the real cause of the problem in a short time.

  • Dishes are dirty after washing

Dishes may be dirty at the end of a washing cycle if spray armholes are clogged. It may also be because the pump unit is too worn out or the heating element is burned out. The wash impeller may also be to blame. We inspect your appliance to determine the issue and repair the dishwasher.

  • The dishwasher shuts down spontaneously

The most common cause of spontaneous dishwasher shutdown is the motor failure. Our technicians are ready to identify the cause. They replace the motor if necessary or provide other troubleshooting.

  • Washing lasts longer than before

When you notice the wash cycle becomes longer than it used to be, it means your appliance has difficulties completing the cycle. These difficulties can come from a bad thermostat that needs to be replaced. This trouble may also be due to a timer failure. In any case, you can rely on our team, who is able to solve the problem quickly.

  • The appliance fails to fill with cold water

If your dishwasher does not have water when it should, it may be due to a timer failure or a faulty valve. When the overflow float switch is out of order or gets stuck, it may also lead to such problems. Sometimes the water inlet solenoid is to blame. When you contact our professionals, you can be sure they get to the bottom of the issue, eliminate every problem, and repair your dishwasher in a short time.

  • The dishwasher won’t remove water

Such draining problems often occur when there is a blockage in the drain line. However, it may also be due to a defective drain impeller or when the drain solenoid gets worn.

  • There is water near or under the dishwasher

The appliance may leak if you choose the wrong soap type or if you use more detergent than necessary. Other common causes are door or tub-to-motor gaskets, when they or spray arm assemblies are worn out or defective. The biggest troubles come with the pump or motor unit when it leaks. However, our experts can address any problem.

In order to reduce the damage to your dishwasher, we highly recommended addressing the problem as soon as you discover it.

949.394.0845 to schedule our repair services or fill out the form on our website.

At Good Repairman we have extensive experience to deal with every dishwasher brand. Being well-stocked, we are ready to replace everything that needs to be replaced in your dishwasher. Thus, we ensure you have nothing to worry about when you select our company to provide your dishwasher with repair services. We never fail in our attempt to keep your appliance in excellent condition so it can work for you keeping your dishes clean.

No matter the issue, at Good Repairman we are ready to have equipment and materials to replace parts on any dishwasher.

  • Heating elements
  • Motors
  • Timers
  • Valves
  • Gaskets
  • Pump assemblies
  • Float switches
  • Wash and drain impellers
  • Thermostats
  • Solenoids

5 Year warranty on installed parts. Over 25 years of experience.

Dishwasher Brands We Commonly Maintenance in Irvine

Quick Tips

Why does my dishwasher stay filled with water too long?

  • Something is lodged in the air gap.

  • Something is lodged in the spray arm.

  • Something is lodged in the filter screen.

  • Something is blocking the drain hose.

  • The drain valve solenoid is defective.

  • The timer is defective.

  • Something is lodged in the pump impeller, or it is out of order.

  • The reversing motor is broken.

Why doesn’t my dishwasher turn off?

● The timer is defective.

● The cycle extender switch is defective.

Why are my dishes still dirty or spotted at the end of the washing cycle?

  • Too many dishes are loaded or loaded improperly.

  • The water is too cold.

  • The water pressure is not high enough.

  • The detergent is inefficient.

  • The detergent dispenser is defective.

  • There is rinse aid leakage.

  • The spray arm is jammed, dirty, or blocked.

  • The heating element is defective.

What Affects A Dishwasher’s Life Expectancy

The dishwasher has become an essential part of today’s modern kitchens. Originally created in the late 1800s by Josephine …

How to Clean a Refrigerator

The refrigerator is the most important and most utilized appliance in the kitchen. Which is why it’s also the most important …

The Best Appliance Brands 2019

There are so many different brands of appliances out there in the world today, it’s hard to even begin to research the …